Solar Starter Kit - 400 Watt 12 Volt Monocrystalline

| /

No matter how long your journey is; with the Renogy 400 Watt Starter Kit you can be confident you are getting the most out of your system. A Starter Kit can give you the freedom to travel further from the grid without having to worry about how you will recharge your most important small electronics. The Renogy 400W Monocrystalline Starter Kit is designed for customers new to solar, or those looking to expand on an existing power system.

The Starter Kit is ideal for several off-grid applications, including RVs, trailers, boats, sheds, and cabins — providing many benefits, including, but not limited to, quiet power production and grid independence. This kit comes with the tools necessary for a new system: four Renogy 100W 12V Monocrystalline Solar Panels(Compact Design), one 30A PWM Wanderer Charge Controller, one 20ft 10AWG MC4 Adaptor Kit, one 8ft 10AWG Tray Cable, three pairs of branch connectors, and four sets of Z-brackets. Start your solar adventure with the convenience and comfort of knowing that you can have power anywhere there is sunlight!

Efficient
  • High solar cell efficiency : Monocrystalline 21%

Reliable

  • EL tested solar modules; no hot-spot heating guaranteed
  • Corrosion-resistant aluminum frame for extended outdoor use; allowing the panels to last for decades
  • TPT back sheet ensures smooth performance over a long period of time
  • IP65 rated junction box provides complete protection against environmental particles and low pressure water jets

Intuitive

  • Sealed, Gel Flooded and Lithium charging algorithm ready
  • 4-Stage battery charging process for a rapid, efficient, and safe battery charging

Safe

  • The Renogy Wanderer is equipped with multiple electronic protections; overcharging, overload, short-circuit and reversed polarity
  • Pre-drilled holes on the back of the panel allow for fast and secure mounting

  • 100W Monocrystalline Panel(Compact Design)
  • Mounting Z Brackets
  • 8ft 10AWG Tray Cables (A pair)
  • Wanderer Li 30A PWM Charge Controller
  • 20ft 10AWG MC4 Adaptor Kit (A pair)
  • MC4 Branch Connectors

100W MONOCRYSTALLINE SOLAR PANEL(COMPACT DESIGN) WANDERER LI 30A PWM CHARGE CONTROLLER  
Maximum Power: 100W Nominal system voltage :12V Auto Recognition
Maximum System Voltage:600V DC (UL) Max. PV Input Voltage: 25 VDC
Open-Circuit Voltage (Voc): 24.3V Rated Charge Current: 30A
Short-Circuit Current (Isc):5.21A Max. PV Input Power: 400W (12V)
Optimum Operating Voltage (Vmp): 20.4V Self-Consumption: <10mA
Optimum Operating Current (Imp): 4.91A High Voltage Disconnect: 16V
Weight: 14.1 lbs/6.4 kg Boost Duration: 120 min
Dimensions: 41.8 X 20.9 X 1.4 In / 106.2 X 53.1 X 3.6 cm Weight: 0.65 lbs
Dimensions: 6.45 x 4.31 x 1.76 inches
8FT 10AWG TRAY CABLES (A PAIR) MOUNTING Z BRACKETS (SET) 
Length: 8ft Eight Long Cap Bolts and Four Short Bolts
AWG: 10 Four Spring Washers and Four Washers
Rating Voltage: 600/1000V Four Z Shape Solar Panel Brackets
Temperature: -40°F to +185°F Four Nuts
ADAPTOR KIT (SET)
Length: 20ft AWG: 10
Rating Voltage: 600/1000V Temperature: -40°F to +185°F

  • Panels: 25-year transferable power output warranty: 5 year/95% efficiency rate; 10 year/90% efficiency rate; 25-year/80% efficiency rate, 5-year material and workmanship warranty
  • Accessories: 1-year material warranty

Join Us, enjoy $15 off

Get the latest from Vanketo Magazine, the first look at new products and van life gatherings